|
|
- \documentclass[11pt]{article}
- %Gummi|065|=)
- \title{\textbf{Commtank: Todo List}}
- \author{Steak Electronics}
- \date{2019-01}
- \begin{document}
-
- \maketitle
-
- \textbf{Todo}
-
-
-
- TODAYS LIST:
- \begin{itemize}
- \item fix bay 3 camera angle. (orange ladder / laptop)
- \item install 6 inch cable on bay 1 camera (orange ladder)
-
- \item install foscam in bay three, facing bay 4, to outside of bay 4. Get it higher up this time. I don't like leaving a cable out there, but I don't see doing conduit at this time...? Or should I do conduit... Maybe if it's feasible? Need conduit mounts... and hardware... edit: will need bolts, good drill bit, and nuts, to fasten camera. it's going to have to hang under top of container, or on top. use electric line powered drill - big ladder
- \item put axis in bay three, possibly outlet in wall, clean up the camera, it's a bit messy
- \item new outlet upstairs behind server. Do this after 3pm. NOT PRIORITY
- \item take inventory of parts purchased, and discuss getting cable for door locks (will need to send email if we don't have cable already)
-
-
- \end{itemize}
- MAIN LIST:
-
- \begin{itemize}
- \item Move Bay 4 modector to outside wall, or maybe just closer to wall will be good enough, facing the walkway (I'd like to have it out of view).
- \item Install other one camera that are remaining fro previous work. Needs sheathing.
- \item door access controls, research and buy parts
- \item rfid, research and have them buy parts
- \item two new cameras outside. Need wiring first, then have them buy cameras and emclosures.
- \item Cameras to watch tank install project waiting to hear back from jbemiller
- \item need cable covers for bay 2 axis cam, and box, or a POE adapter
- \item adjust front door camera down
- \item Modectors in other bays, 1, 2, 3 (two in 3)
- \item Consider modectors for outside, near cameras later. They will just be an alarm, perhaps on a camera as mocord, but not nodect or modect. Otherwise, they will be on their own section as an alarm.
-
- \item Map install somewhere (where?)
- \item check existing doors for lock and rfid brand
- \item dashcams for trucks?
- \item Build outdoor enclosure - on hold. May use for motion dector
- \item Cable covers for bay 2 camera
- \item discuss camera in office first floor, is that wanted on front door? (first do rfid and door access controls)
-
-
-
-
- \end{itemize}
-
-
-
-
-
-
-
-
- \end{document}
|