\documentclass[11pt]{article}
%Gummi|065|=)
\title{\textbf{Tank recording setup}}
\author{Steak Electronics}
\date{2019-04}
\begin{document}

\maketitle

\tableofcontents

\section{overview}

\section{Notes:}
In order to get wifi to work, I needed to install firmware-iwlwifi*

I also installed firmware-linux-nonfree

That latter step might not have been necessary.

Needed also iw.

apt-get install iw wpasupplicant

There were some configs made for wifi.

\begin{verbatim}
ctrl_interface=/var/run/wpa_supplicant

network={

        ssid="wifiname"
        psk="passwordhere"
}


# should be all thats needed, unless you hide ssid.
# this above file goes in /etc/wpa_supplicant/wpa_supplicant.conf



#then
#the network interfaces looks like this:
# interfaces(5) file used by ifup(8) and ifdown(8)
# Include files from /etc/network/interfaces.d:


allow-hotplug wlan0
iface wlan0 inet dhcp
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

source-directory /etc/network/interfaces.d

#tested in ascii
#ifup wlan0
#should work
\end{verbatim}

Now, I need to do the following:

Have wifi router connect to commtank via vpn
have laptop connected via wifi (static IP), then have a dhcp server on ethernet lan. \footnote{the static is easily done via changing dhcp to static, adding address, netmask, and gateway in interfaces file. tested.}
Have route to wifi router lan, over vpn, and test that commtank can connect to the laptop.
set static ip on camera (192.168.220.101)















\end{document}