You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
42 lines
1.1 KiB
42 lines
1.1 KiB
/*
|
|
Blink
|
|
The basic Energia example.
|
|
Turns on an LED on for one second, then off for one second, repeatedly.
|
|
Change the LED define to blink other LEDs.
|
|
|
|
Hardware Required:
|
|
* LaunchPad with an LED
|
|
|
|
This example code is in the public domain.
|
|
*/
|
|
|
|
// most launchpads have a red LED
|
|
//#define LED RED_LED
|
|
|
|
//see pins_energia.h for more LED definitions
|
|
#define LED GREEN_LED
|
|
#define DUSTSENSORPIN 1
|
|
|
|
|
|
// the setup routine runs once when you press reset:
|
|
void setup() {
|
|
// initialize the digital pin as an output.
|
|
pinMode(LED, OUTPUT);
|
|
pinMode(DUSTSENSORPIN, INPUT);
|
|
Serial.begin(4800);
|
|
}
|
|
|
|
// the loop routine runs over and over again forever:
|
|
void loop() {
|
|
Serial.println("test");
|
|
digitalWrite(LED, HIGH); // turn the LED on (HIGH is the voltage level)
|
|
delay(1000); // wait for a second
|
|
digitalWrite(LED, LOW); // turn the LED off by making the voltage LOW
|
|
delay(1000); // wait for a second
|
|
int DustSensorState = digitalRead(DUSTSENSORPIN);
|
|
Serial.print("Sensor reads:");
|
|
Serial.println(DustSensorState);
|
|
|
|
}
|
|
|
|
|