diff --git a/Computer_Switchboard/docs/3.log b/Computer_Switchboard/docs/3.log index 07050e2..0c98175 100644 --- a/Computer_Switchboard/docs/3.log +++ b/Computer_Switchboard/docs/3.log @@ -1,12 +1,12 @@ -This is pdfTeX, Version 3.14159265-2.6-1.40.15 (TeX Live 2015/dev/Debian) (preloaded format=pdflatex 2018.11.28) 8 MAY 2019 23:28 +This is pdfTeX, Version 3.14159265-2.6-1.40.15 (TeX Live 2015/dev/Debian) (preloaded format=pdflatex 2018.11.28) 11 MAY 2019 19:49 entering extended mode restricted \write18 enabled. %&-line parsing enabled. -**/home/layoutdev/Desktop/code/documentation_general/Misc_2019/Computer_Switchb -oard/docs/3.tex +**/home/layoutdev/Desktop/code/documentation_general/Electronics_Projects_2019/ +Computer_Switchboard/docs/3.tex -(/home/layoutdev/Desktop/code/documentation_general/Misc_2019/Computer_Switchbo -ard/docs/3.tex +(/home/layoutdev/Desktop/code/documentation_general/Electronics_Projects_2019/C +omputer_Switchboard/docs/3.tex LaTeX2e <2014/05/01> Babel <3.9l> and hyphenation patterns for 2 languages loaded. (/usr/share/texlive/texmf-dist/tex/latex/base/article.cls @@ -58,12 +58,12 @@ LaTeX Font Info: Font shape `OMS/cmr/m/n' in size <10.95> not available {/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] [2] (./3.aux) ) Here is how much of TeX's memory you used: 249 strings out of 495020 - 3005 string characters out of 6181323 + 3053 string characters out of 6181323 49970 words of memory out of 5000000 3536 multiletter control sequences out of 15000+600000 8451 words of font info for 30 fonts, out of 8000000 for 9000 14 hyphenation exceptions out of 8191 - 21i,6n,19p,378b,187s stack positions out of 5000i,500n,10000p,200000b,80000s + 21i,6n,19p,394b,187s stack positions out of 5000i,500n,10000p,200000b,80000s +Babel <3.9l> and hyphenation patterns for 2 languages loaded. +(/usr/share/texlive/texmf-dist/tex/latex/base/article.cls +Document Class: article 2014/09/29 v1.4h Standard LaTeX document class +(/usr/share/texlive/texmf-dist/tex/latex/base/size11.clo +File: size11.clo 2014/09/29 v1.4h Standard LaTeX file (size option) +) +\c@part=\count79 +\c@section=\count80 +\c@subsection=\count81 +\c@subsubsection=\count82 +\c@paragraph=\count83 +\c@subparagraph=\count84 +\c@figure=\count85 +\c@table=\count86 +\abovecaptionskip=\skip41 +\belowcaptionskip=\skip42 +\bibindent=\dimen102 +) (./4.aux) +\openout1 = `4.aux'. + +LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 6. +LaTeX Font Info: ... okay on input line 6. +LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 6. +LaTeX Font Info: ... okay on input line 6. +LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 6. +LaTeX Font Info: ... okay on input line 6. +LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 6. +LaTeX Font Info: ... okay on input line 6. +LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 6. +LaTeX Font Info: ... okay on input line 6. +LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 6. +LaTeX Font Info: ... okay on input line 6. +LaTeX Font Info: External font `cmex10' loaded for size +(Font) <12> on input line 8. +LaTeX Font Info: External font `cmex10' loaded for size +(Font) <8> on input line 8. +LaTeX Font Info: External font `cmex10' loaded for size +(Font) <6> on input line 8. + (./4.toc +LaTeX Font Info: External font `cmex10' loaded for size +(Font) <10.95> on input line 4. +) +\tf@toc=\write3 +\openout3 = `4.toc'. + +LaTeX Font Info: Try loading font information for OMS+cmr on input line 17. + +(/usr/share/texlive/texmf-dist/tex/latex/base/omscmr.fd +File: omscmr.fd 2014/09/29 v2.5h Standard LaTeX font definitions +) +LaTeX Font Info: Font shape `OMS/cmr/m/n' in size <10.95> not available +(Font) Font shape `OMS/cmsy/m/n' tried instead on input line 17. + [1 + +{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] [2] (./4.aux) ) +Here is how much of TeX's memory you used: + 257 strings out of 495020 + 3147 string characters out of 6181323 + 50970 words of memory out of 5000000 + 3540 multiletter control sequences out of 15000+600000 + 9118 words of font info for 32 fonts, out of 8000000 for 9000 + 14 hyphenation exceptions out of 8191 + 22i,6n,19p,394b,187s stack positions out of 5000i,500n,10000p,200000b,80000s + +Output written on 4.pdf (2 pages, 69964 bytes). +PDF statistics: + 31 PDF objects out of 1000 (max. 8388607) + 21 compressed objects within 1 object stream + 0 named destinations out of 1000 (max. 500000) + 1 words of extra memory for PDF output out of 10000 (max. 10000000) + diff --git a/Computer_Switchboard/docs/4.pdf b/Computer_Switchboard/docs/4.pdf new file mode 100644 index 0000000..a66205f Binary files /dev/null and b/Computer_Switchboard/docs/4.pdf differ diff --git a/Computer_Switchboard/docs/4.tex b/Computer_Switchboard/docs/4.tex new file mode 100644 index 0000000..2a848dc --- /dev/null +++ b/Computer_Switchboard/docs/4.tex @@ -0,0 +1,66 @@ +\documentclass[11pt]{article} +%Gummi|065|=) +\title{\textbf{Computer Switch Board}} +\author{Steak Electronics} +\date{03/17/19} +\begin{document} + +\maketitle + +\tableofcontents + + + + +\section{Requirements} +\begin{itemize} +\item large pcb board +\item fused power input - EDIT: instead I will have a case around the nano, 3d printed, and have the case connect into the pcb, i.e. cutouts for the case in the pcb, and clips on case. the rest of the pcb will be fused somewhere, after the nano. but nano powers it. +\item arduino nano +\item switch to activate things +\item rotary to change number +\item 7 digit display to list number, and shift register, resistors +\item explanation of what numbers do on board +\item 3d printed cover over nano + + + + \end{itemize} + +\section{build notes} +The 7 segment symbols are abstracted in kicad. Job security for engineers. + +The example gave a common Vcc, with all pins being connected to GND, and sinked when on. + +The data sheet of the 7seg, omits the schematic. but does show that it is common anode, or common vcc. Pin 3 is left out, but that is VCC. + +It's easier to use a 10 pin connector, then to decipher the abstracted symbols. + +\section{button choice - Arcade style button} + +Digikey has an arcade style button section. There is a 24mm and 30mm panel cutout. That appears to be the standard. +I'll start with 30mm. + +\subsection{arcade pinout} +A note on the button, the led positive is denoted by a red mark of paint on the pin. The switch is the middle, with a grey box holding it. Somewhat confusing. You can test the switch with a DMM. + +\section{Minimal\_Read3.py} +\subsection{Troubleshooting} +\subsubsection{/usr/bin/env: ?python?: No such file or directory} +I received this error on a fresh install of GNU Linux. I found out that my distribution had only python3 by default, not python2. So apt-get install python +There was also talk about line endings and carraige returns causing this error, but not in my case. +\subsubsection{ImportError: No module named serial} +Then after installing python, I needed, +sudo apt-get install python-serial +Another approach (much more stuff) +sudo pip install pyserial +I did the former. +Oddly enough, my other install didn't need this. I wonder what installed python serial last time... + + + + + + + +\end{document} diff --git a/Computer_Switchboard/docs/4.tex~ b/Computer_Switchboard/docs/4.tex~ new file mode 100644 index 0000000..79354ea --- /dev/null +++ b/Computer_Switchboard/docs/4.tex~ @@ -0,0 +1,52 @@ +\documentclass[11pt]{article} +%Gummi|065|=) +\title{\textbf{Computer Switch Board}} +\author{Steak Electronics} +\date{03/17/19} +\begin{document} + +\maketitle + +\section{Requirements} +\begin{itemize} +\item large pcb board +\item fused power input - EDIT: instead I will have a case around the nano, 3d printed, and have the case connect into the pcb, i.e. cutouts for the case in the pcb, and clips on case. the rest of the pcb will be fused somewhere, after the nano. but nano powers it. +\item arduino nano +\item switch to activate things +\item rotary to change number +\item 7 digit display to list number, and shift register, resistors +\item explanation of what numbers do on board +\item 3d printed cover over nano + + + + \end{itemize} + +\section{build notes} +The 7 segment symbols are abstracted in kicad. Job security for engineers. + +The example gave a common Vcc, with all pins being connected to GND, and sinked when on. + +The data sheet of the 7seg, omits the schematic. but does show that it is common anode, or common vcc. Pin 3 is left out, but that is VCC. + +It's easier to use a 10 pin connector, then to decipher the abstracted symbols. + +\section{button choice - Arcade style button} + +Digikey has an arcade style button section. There is a 24mm and 30mm panel cutout. That appears to be the standard. +I'll start with 30mm. + +\subsection{arcade pinout} +A note on the button, the led positive is denoted by a red mark of paint on the pin. The switch is the middle, with a grey box holding it. Somewhat confusing. You can test the switch with a DMM. + + +\section{Troubleshooting} +\subsection{/usr/bin/env: ?python?: No such file or directory} +I received this error on a fresh install of GNU Linux. I found out that my distribution had only python3 by default, not python2. So apt-get install python +There was also talk about line endings and carraige returns causing this error, but not in my case. + + + + + +\end{document} diff --git a/Computer_Switchboard/docs/4.toc b/Computer_Switchboard/docs/4.toc new file mode 100644 index 0000000..f03b1b3 --- /dev/null +++ b/Computer_Switchboard/docs/4.toc @@ -0,0 +1,8 @@ +\contentsline {section}{\numberline {1}Requirements}{1} +\contentsline {section}{\numberline {2}build notes}{2} +\contentsline {section}{\numberline {3}button choice - Arcade style button}{2} +\contentsline {subsection}{\numberline {3.1}arcade pinout}{2} +\contentsline {section}{\numberline {4}Minimal\_Read3.py}{2} +\contentsline {subsection}{\numberline {4.1}Troubleshooting}{2} +\contentsline {subsubsection}{\numberline {4.1.1}/usr/bin/env: ?python?: No such file or directory}{2} +\contentsline {subsubsection}{\numberline {4.1.2}ImportError: No module named serial}{2}