diff --git a/ZMHW_Modector/pcb/README.md b/ZMHW_Modector/pcb/README.md
index 774ef26..ffa24ff 100644
--- a/ZMHW_Modector/pcb/README.md
+++ b/ZMHW_Modector/pcb/README.md
@@ -1,20 +1,9 @@
-# KiCad Template for Arduino 101 Shield 
-
-This is a KiCad template to make it easy to include the Arduino 101 in a project. 
-
-It comes with all the design rules to meet the 2-layer OSH Park specs and stackup.
-
-- <a href="http://docs.oshpark.com/services/two-layer/">OSH Park Two Layer Specs</a>
-- <a href="http://docs.oshpark.com/design-tools/kicad">OSH Park KiCad Help</a>
-- <a href="https://www.arduino.cc/en/Main/ArduinoBoard101">Arduino 101 Product Page</a>
-
-### Instructions
-
-1. Open KiCad.
-1. Open Preferences > Configure Paths and note the value of 'KICAD_PTEMPLATES'.
-1. <a href="https://github.com/wickerbox/wickerlib/blob/master/templates/arduino-101-shield-template.zip?raw=true">Download the template zip</a> and extract into the location of 'KICAD_PTEMPLATES'.
-1. In KiCad, open File > New Project > New Project from Template.
-1. Select the location of your new project. The name of the folder will be the name of your project.
-1. The templates with folders in the 'KICAD_PTEMPLATES' are listed under 'Portable Templates" tab.
-1. Select the template and click 'OK'.
-1. Your project now exists, so you can open EESchema and PCBNew and design as usual.
+Gerbers:
+
+Rev 1.45
+Ethernet is still backwards, but I removed as many arduino
+pins as possible to make soldering quicker. To improve upon
+this:
+* Fix Enc being backwards
+* Use Nano instead of Uno (though the vreg might
+not be as good, so may want on board switcher...)
\ No newline at end of file