From f1a024ff0c50afffef2c92d45e4e6d3590742c60 Mon Sep 17 00:00:00 2001
From: Your Name <you@example.com>
Date: Wed, 24 Jul 2019 01:12:21 -0400
Subject: [PATCH] stationdata.

---
 .../batterycharge_stationdata.ino             | 84 +++++++++++++++++--
 1 file changed, 79 insertions(+), 5 deletions(-)

diff --git a/batterycharge_stationdata/arduino/batterycharge_stationdata/batterycharge_stationdata.ino b/batterycharge_stationdata/arduino/batterycharge_stationdata/batterycharge_stationdata.ino
index 31f6396..968285f 100644
--- a/batterycharge_stationdata/arduino/batterycharge_stationdata/batterycharge_stationdata.ino
+++ b/batterycharge_stationdata/arduino/batterycharge_stationdata/batterycharge_stationdata.ino
@@ -6,10 +6,43 @@
  */
 
 
-int ADC_VAL0 = A0;
+//NOTE: we are using 1.1V VRef, so keep ADC input low.
+
+//current
+int ADC_VAL0 = A1;
+//
+int ADC_VAL1 = A4;
+
+
+
+//smoothing
+const int numReadings = 100;
+
+int readings[numReadings];      // the readings from the analog input
+int readIndex = 0;              // the index of the current reading
+int total = 0;                  // the running total
+int average = 0;                // the average
+
+int readings2[numReadings];      // the readings from the analog input
+int readIndex2 = 0;              // the index of the current reading
+double total2 = 0;               // the running total
+int average2 = 0;                // the average
+
+int start = 0;
+int ADCVAL0_State = 0;
+int ADCVAL1_State = 0;
+int writeresult = 0;
 
 // the setup routine runs once when you press reset:
 void setup() {
+
+  for (int thisReading = 0; thisReading < numReadings; thisReading++) {
+    readings[thisReading] = 0;
+    readings2[thisReading] = 0;
+  }
+   
+
+  
   // initialize serial communication at 9600 bits per second:
   Serial.begin(9600);
   // make the ADC_VAL0's pin an input:
@@ -54,12 +87,53 @@ void setup() {
 
 // the loop routine runs over and over again forever:
 void loop() {
+
+  // subtract the last reading:
+  total = total - readings[readIndex];
+  total2 = total2 - readings2[readIndex];
+  // read from the sensor:
+  readings[readIndex] = analogRead(ADC_VAL0);
+  readings2[readIndex] = analogRead(ADC_VAL1);
+  // add the reading to the total:
+  total = total + readings[readIndex];
+  total2 = total2 + readings2[readIndex];
+  // advance to the next position in the array:
+  readIndex = readIndex + 1;
+
+  // if we're at the end of the array...
+  if (readIndex >= numReadings) {
+    // ...wrap around to the beginning:
+    readIndex = 0;
+    start = 1;
+    writeresult = 1;
+  }
+
+  // calculate the average:
+  average = total / numReadings;
+  average2 = total2 / numReadings;
+  
+  // send it to the computer as ASCII digits
+  if(start){
+  ADCVAL0_State = average;
+  ADCVAL1_State = average2;
+  }
+
+  
   // read the input pin:
-  int ADCVAL0_State = analogRead(ADC_VAL0);
+  //int ADCVAL0_State = analogRead(ADC_VAL0);
+  if (writeresult){
+  //int ADCVAL1_State = analogRead(ADC_VAL1);
+  
   // print out the state of the button:
-  Serial.println(ADCVAL0_State);
-  delay(10000);        // delay in between reads for stability
-
+  Serial.print(" ADCVAL0 Current in mA, ");
+  Serial.print(ADCVAL0_State);
+  Serial.print(",");
+  Serial.print(" ADCVAL1 Battery Voltage divby 10, "); 
+  Serial.println(ADCVAL1_State);
+  delay(5000);        // delay in between reads for stability
+  
+  writeresult = 0;
+  }
 
   //Trying to debug why I cant change a bit in a register. fucking wiring. fuck search engines.
   //int dog = ADMUX;