Air_Quality_Sensor_PPD42/code/Blink/Blink.ino

/*
  Blink
  The basic Energia example.
  Turns on an LED on for one second, then off for one second, repeatedly.
  Change the LED define to blink other LEDs.
  
  Hardware Required:
  * LaunchPad with an LED
  
  This example code is in the public domain.
*/

// most launchpads have a red LED
//#define LED RED_LED

//see pins_energia.h for more LED definitions
#define LED GREEN_LED
#define DUSTSENSORPIN 1


// the setup routine runs once when you press reset:
void setup() {                
  // initialize the digital pin as an output.
  pinMode(LED, OUTPUT);     
  pinMode(DUSTSENSORPIN, INPUT); 
  Serial.begin(4800);
}

// the loop routine runs over and over again forever:
void loop() {
  Serial.println("test");
  digitalWrite(LED, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(1000);               // wait for a second
  digitalWrite(LED, LOW);    // turn the LED off by making the voltage LOW
  delay(1000);               // wait for a second
  int DustSensorState = digitalRead(DUSTSENSORPIN);
  Serial.print("Sensor reads:");
  Serial.println(DustSensorState);
  
}