|
/* --COPYRIGHT--,BSD
|
|
* Copyright (c) 2013, Texas Instruments Incorporated
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* * Neither the name of Texas Instruments Incorporated nor the names of
|
|
* its contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
|
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
|
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
|
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
* --/COPYRIGHT--*/
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! TouchProGUI.h
|
|
//
|
|
//! TouchProGUI enables interrupt-driven UART communication
|
|
//! to the Touch Pro GUI platform tool. The protocol is defined in
|
|
//! SLAU486 (The TouchPro GUI User's Guide).
|
|
//! The baud rate is fixed at 9600B.
|
|
//
|
|
//! Resources: UCA0 in UART Mode, USCIAB0TX_VECTOR
|
|
//! - UCA0 BR and MOD settings need to be placed in the header file for the
|
|
//! to provide 9600B with a given input clock.
|
|
//
|
|
//! \author Texas Instruments
|
|
//! \author MSP430 Strategic Applications
|
|
//
|
|
//! \version 1.0 - W. Schnoor, 1/7/14: Initial Release
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#ifndef TOUCHPROGUI_H_
|
|
#define TOUCHPROGUI_H_
|
|
|
|
#include <msp430.h>
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \def TOUCHPROGUI_MAX_CHANNELS is user-selectable and defines the maximum
|
|
//! number of channels that can be sent to TouchPro GUI. This effects the
|
|
//! RAM requirements.
|
|
//
|
|
//*****************************************************************************
|
|
#define TOUCHPROGUI_MAX_CHANNELS (10)
|
|
#define UART_BR_LOWER (0x71)
|
|
#define UART_BR_UPPER (0x02)
|
|
#define UART_MOD (0x00)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \def TOUCHPROGUI_SYNC_UPPER defines the upper byte of the sync word.
|
|
//
|
|
//! \def TOUCHPROGUI_SYNC_LOWER defines the lower byte of the sync word.
|
|
//
|
|
//! \def TOUCHPROGUI_BUFFER_LENGTH defines the required length of the transmit
|
|
//! buffer. This is based upn the TOUCHPROGUI_MAX_CHANNELS definition.
|
|
//
|
|
//*****************************************************************************
|
|
#define TOUCHPROGUI_SYNC_UPPER (0x55)
|
|
#define TOUCHPROGUI_SYNC_LOWER (0xAA)
|
|
#define TOUCHPROGUI_BUFFER_LENGTH (TOUCHPROGUI_MAX_CHANNELS * 3 + 3)
|
|
|
|
void TouchProGUI_init(void);
|
|
void TouchProGUI_sendData(uint16_t *ui16DataBuffer, uint8_t ui8Length);
|
|
|
|
#endif /* TOUCHPROGUI_H_ */
|