|
|
- /* --COPYRIGHT--,BSD
- * Copyright (c) 2013, Texas Instruments Incorporated
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * * Neither the name of Texas Instruments Incorporated nor the names of
- * its contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- * --/COPYRIGHT--*/
-
- //*****************************************************************************
- //
- //! TouchProGUI.h
- //
- //! TouchProGUI enables interrupt-driven UART communication
- //! to the Touch Pro GUI platform tool. The protocol is defined in
- //! SLAU486 (The TouchPro GUI User's Guide).
- //! The baud rate is fixed at 9600B.
- //
- //! Resources: UCA0 in UART Mode, USCIAB0TX_VECTOR
- //! - UCA0 BR and MOD settings need to be placed in the header file for the
- //! to provide 9600B with a given input clock.
- //
- //! \author Texas Instruments
- //! \author MSP430 Strategic Applications
- //
- //! \version 1.0 - W. Schnoor, 1/7/14: Initial Release
- //
- //*****************************************************************************
-
- #ifndef TOUCHPROGUI_H_
- #define TOUCHPROGUI_H_
-
- #include <msp430.h>
- #include <stdint.h>
- #include <stdbool.h>
-
- //*****************************************************************************
- //
- //! \def TOUCHPROGUI_MAX_CHANNELS is user-selectable and defines the maximum
- //! number of channels that can be sent to TouchPro GUI. This effects the
- //! RAM requirements.
- //
- //*****************************************************************************
- #define TOUCHPROGUI_MAX_CHANNELS (10)
- #define UART_BR_LOWER (0x71)
- #define UART_BR_UPPER (0x02)
- #define UART_MOD (0x00)
-
- //*****************************************************************************
- //
- //! \def TOUCHPROGUI_SYNC_UPPER defines the upper byte of the sync word.
- //
- //! \def TOUCHPROGUI_SYNC_LOWER defines the lower byte of the sync word.
- //
- //! \def TOUCHPROGUI_BUFFER_LENGTH defines the required length of the transmit
- //! buffer. This is based upn the TOUCHPROGUI_MAX_CHANNELS definition.
- //
- //*****************************************************************************
- #define TOUCHPROGUI_SYNC_UPPER (0x55)
- #define TOUCHPROGUI_SYNC_LOWER (0xAA)
- #define TOUCHPROGUI_BUFFER_LENGTH (TOUCHPROGUI_MAX_CHANNELS * 3 + 3)
-
- void TouchProGUI_init(void);
- void TouchProGUI_sendData(uint16_t *ui16DataBuffer, uint8_t ui8Length);
-
- #endif /* TOUCHPROGUI_H_ */
|
