\documentclass[11pt]{article}
|
|
%Gummi|065|=)
|
|
\title{\textbf{Tank recording setup}}
|
|
\author{Steak Electronics}
|
|
\date{2019-04}
|
|
\begin{document}
|
|
|
|
\maketitle
|
|
|
|
\tableofcontents
|
|
|
|
\section{overview}
|
|
|
|
\section{Notes:}
|
|
In order to get wifi to work, I needed to install firmware-iwlwifi*
|
|
|
|
I also installed firmware-linux-nonfree
|
|
|
|
That latter step might not have been necessary.
|
|
|
|
Needed also iw.
|
|
|
|
apt-get install iw wpasupplicant
|
|
|
|
There were some configs made for wifi.
|
|
|
|
\begin{verbatim}
|
|
ctrl_interface=/var/run/wpa_supplicant
|
|
|
|
network={
|
|
|
|
ssid="wifiname"
|
|
psk="passwordhere"
|
|
}
|
|
|
|
|
|
# should be all thats needed, unless you hide ssid.
|
|
# this above file goes in /etc/wpa_supplicant/wpa_supplicant.conf
|
|
|
|
|
|
|
|
#then
|
|
#the network interfaces looks like this:
|
|
# interfaces(5) file used by ifup(8) and ifdown(8)
|
|
# Include files from /etc/network/interfaces.d:
|
|
|
|
|
|
allow-hotplug wlan0
|
|
iface wlan0 inet dhcp
|
|
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
|
|
|
|
source-directory /etc/network/interfaces.d
|
|
|
|
#tested in ascii
|
|
#ifup wlan0
|
|
#should work
|
|
\end{verbatim}
|
|
|
|
Now, I need to do the following:
|
|
|
|
Have wifi router connect to commtank via vpn
|
|
have laptop connected via wifi (static IP), then have a dhcp server on ethernet lan. \footnote{the static is easily done via changing dhcp to static, adding address, netmask, and gateway in interfaces file. tested.}
|
|
Have route to wifi router lan, over vpn, and test that commtank can connect to the laptop.
|
|
set static ip on camera (192.168.220.101)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
\end{document}
|