|
|
- \documentclass[11pt]{article}
- %Gummi|065|=)
- \title{\textbf{Commtank: Todo List}}
- \author{Steak Electronics}
- \date{2019-01}
- \begin{document}
-
- \maketitle
-
- \textbf{Todo}
-
-
-
- TODAYS LIST:
- \begin{itemize}
- \item reprogram motion sensor in bay 1
- \item new outlet upstairs behind server. Do this after 3pm. NOT PRIORITY
- \item bring wood bits to ctank, so can put hole in above rfid door sensor
- \item measure door opening, to see whether 11/32 or 5/8ths on upstairs first bay and bay 4.
-
-
-
- \end{itemize}
- MAIN LIST:
-
- \begin{itemize}
- \item fuses for all cameras
- \item replace all electrical boxes with larger boxes, so there is enough room for everything.
- \item Move Bay 4 modector to outside wall, or maybe just closer to wall will be good enough, facing the walkway (I'd like to have it out of view).
- \item Install other one camera that are remaining fro previous work. Needs sheathing.
- \item door access controls, research and buy parts
- \item rfid for tool rooms, research and have them buy parts
- \item two new cameras outside. Need wiring first, then have them buy cameras and emclosures.
- \item Cameras to watch tank install project waiting to hear back from jbemiller
- \item need cable covers for bay 2 axis cam, and box, or a POE adapter
- \item adjust front door camera down
- \item Modectors in other bays, 1, 2, 3 (two in 3)
- \item Consider modectors for outside, near cameras later. They will just be an alarm, perhaps on a camera as mocord, but not nodect or modect. Otherwise, they will be on their own section as an alarm.
-
- \item Map install somewhere (where?)
- \item check existing doors for lock and rfid brand
- \item dashcams for trucks?
- \item Build outdoor enclosure - on hold. May use for motion dector
- \item discuss camera in office first floor, is that wanted on front door? (first do rfid and door access controls)
- \item get power strip to replace one I personally brought for bay 4.
- \item buy surge protectorss = ethernet, microcenter, for two spots, after server, and after bay 2
- \item commtank needs poe adapters for cameras. needs 1 at the moment
- \item buy hammond boxes for outdoor wiring, waterproof. need to hold wires, maybe motion detector...
- \item Setup email alerts for Kevin's home cctv
- \item possibly conduit to bay 2 camera axis
- \item conduit for wire that goes to container. have it wrap around back? Need to do in mild, but not summer weather (as bees in container)
- \item get conduit hardware for steel container (bolts)
- \item get metal drilling bit, for drilling into container
- \item bring jigsaw for bay 3 camera
- \item adjust cameras in bay 4, move foscam, to right end. add axis to middle. Have them looking opposite each other.
- \item make and install motion detectors.
- \item Point Mechanic bay 2 old analog camera down slightly. It is pointed too far up.
-
-
- \end{itemize}
-
-
-
-
-
-
-
-
- \end{document}
|