Electronics_Projects_2019/TodoList/docs/6.tex~

\documentclass[11pt]{article}
%Gummi|065|=)
\title{\textbf{Commtank: Todo List}}
\author{Steak Electronics}
\date{2019-01}
\begin{document}

\maketitle

\textbf{Todo}



TODAYS LIST:
\begin{itemize} 
\item reprogram motion sensor in bay 1
\item new outlet upstairs behind server. Do this after 3pm. NOT PRIORITY
\item bring wood bits to ctank, so can put hole in above rfid door sensor
\item measure door opening, to see whether 11/32 or 5/8ths on upstairs first bay and bay 4.  
  

 
\end{itemize}
MAIN LIST: 

\begin{itemize}
\item Move Bay 4 modector to outside wall, or maybe just closer to wall will be good enough, facing the walkway (I'd like to have it out of view).
\item Install other one camera that are remaining fro previous work. Needs sheathing.
\item door access controls, research and buy parts
\item rfid for tool rooms, research and have them buy parts
\item two new cameras outside. Need wiring first, then have them buy cameras and emclosures.
\item Cameras to watch tank install project waiting to hear back from jbemiller
\item need cable covers for bay 2 axis cam, and box, or a POE adapter
\item adjust front door camera down
\item Modectors in other bays, 1, 2, 3 (two in 3)
\item Consider modectors for outside, near cameras later. They will just be an alarm, perhaps on a camera as mocord, but not nodect or modect. Otherwise, they will be on their own section as an alarm.
  
\item Map install somewhere (where?)
\item check existing doors for lock and rfid brand
\item dashcams for trucks?
\item Build outdoor enclosure - on hold. May use for motion dector
\item discuss camera in office first floor, is that wanted on front door? (first do rfid and door access controls)
\item get power strip to replace one I personally brought for bay 4.   
\item buy surge protectorss = ethernet, microcenter, for two spots, after server, and after bay 2
\item commtank needs poe adapters for cameras. needs 1 at the moment
\item buy hammond boxes for outdoor wiring, waterproof. need to hold wires, maybe motion detector...
\item Setup email alerts for Kevin's home cctv
\item possibly conduit to bay 2 camera axis
\item conduit for wire that goes to container. have it wrap around back? Need to do in mild, but not summer weather (as bees in container)
\item get conduit hardware for steel container (bolts)
\item get metal drilling bit, for drilling into container
\item bring jigsaw for bay 3 camera
\item adjust cameras in bay 4, move foscam, to right end. add axis to middle. Have them looking opposite each other.
\item make and install motion detectors.
  \item Point Mechanic bay 2 old analog camera down slightly. It is pointed too far up.
  

\end{itemize}








\end{document}