|
\documentclass[11pt]{article}
|
|
%Gummi|065|=)
|
|
\title{\textbf{Commtank: Todo List}}
|
|
\author{Steak Electronics}
|
|
\date{2019-01}
|
|
\begin{document}
|
|
|
|
\maketitle
|
|
|
|
\textbf{Todo}
|
|
|
|
|
|
|
|
TODAYS LIST:
|
|
\begin{itemize}
|
|
\item fix bay 3 camera angle. (orange ladder / laptop), and mount case (screws)
|
|
\item install 6 inch cable on bay 1 camera (orange ladder)
|
|
|
|
\item install foscam in bay three, facing bay 4, to outside of bay 4. Get it higher up this time. I don't like leaving a cable out there, but I don't see doing conduit at this time...? Or should I do conduit... Maybe if it's feasible? Need conduit mounts... and hardware... edit: will need bolts, good drill bit, and nuts, to fasten camera. it's going to have to hang under top of container, or on top. use electric line powered drill - big ladder
|
|
\item put axis in bay three, possibly outlet in wall, clean up the camera, it's a bit messy
|
|
\item new outlet upstairs behind server. Do this after 3pm. NOT PRIORITY
|
|
\item take inventory of parts purchased, and discuss getting cable for door locks (will need to send email if we don't have cable already)
|
|
|
|
|
|
\end{itemize}
|
|
MAIN LIST:
|
|
|
|
\begin{itemize}
|
|
\item Move Bay 4 modector to outside wall, or maybe just closer to wall will be good enough, facing the walkway (I'd like to have it out of view).
|
|
\item Install other one camera that are remaining fro previous work. Needs sheathing.
|
|
\item door access controls, research and buy parts
|
|
\item rfid, research and have them buy parts
|
|
\item two new cameras outside. Need wiring first, then have them buy cameras and emclosures.
|
|
\item Cameras to watch tank install project waiting to hear back from jbemiller
|
|
\item need cable covers for bay 2 axis cam, and box, or a POE adapter
|
|
\item adjust front door camera down
|
|
\item Modectors in other bays, 1, 2, 3 (two in 3)
|
|
\item Consider modectors for outside, near cameras later. They will just be an alarm, perhaps on a camera as mocord, but not nodect or modect. Otherwise, they will be on their own section as an alarm.
|
|
|
|
\item Map install somewhere (where?)
|
|
\item check existing doors for lock and rfid brand
|
|
\item dashcams for trucks?
|
|
\item Build outdoor enclosure - on hold. May use for motion dector
|
|
\item Cable covers for bay 2 camera
|
|
\item discuss camera in office first floor, is that wanted on front door? (first do rfid and door access controls)
|
|
\item get power strip to replace one I personally brought for bay 4.
|
|
\item buy surge protectorss = ethernet, microcenter, for two spots, after server, and after bay 2
|
|
\item commtank needs poe adapters for cameras. needs 1 at the moment
|
|
\item buy hammond boxes for outdoor wiring, waterproof. need to hold wires, maybe motion detector...
|
|
|
|
|
|
|
|
\end{itemize}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
\end{document}
|