adminguy
/
Electronics_Projects_2020
1
0
Fork 0
Code Issues 0 Pull Requests 0 Releases 0 Wiki Activity
Browse Source

up

master
Your Name 4 years ago
parent
a30f040bfa
commit
5b664bf865
21 changed files with 1567 additions and 3 deletions
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. +96
    -0
      60hz_Divider/code/arduino_parse_test/arduino_parse_test.ino
  2. BIN
      60hz_Divider/datasheets/SiT8008B-rev1p05.pdf
  3. +1
    -3
      Attiny_Solar_Energy_Harvest/code/mplab/tests8_timer_6000hz.X/nbproject/private/private.xml
  4. +113
    -0
      Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/Makefile
  5. BIN
      Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/build/default/production/main.o
  6. +43
    -0
      Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/build/default/production/main.o.d
  7. +17
    -0
      Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/dist/default/production/memoryfile.xml
  8. BIN
      Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/dist/default/production/tests9_timer_6000hz.X.production.elf
  9. +7
    -0
      Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/dist/default/production/tests9_timer_6000hz.X.production.hex
  10. +395
    -0
      Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/dist/default/production/tests9_timer_6000hz.X.production.map
  11. +305
    -0
      Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/main.c
  12. +158
    -0
      Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/Makefile-default.mk
  13. +10
    -0
      Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/Makefile-genesis.properties
  14. +69
    -0
      Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/Makefile-impl.mk
  15. +36
    -0
      Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/Makefile-local-default.mk
  16. +13
    -0
      Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/Makefile-variables.mk
  17. +73
    -0
      Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/Package-default.bash
  18. +160
    -0
      Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/configurations.xml
  19. +25
    -0
      Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/private/configurations.xml
  20. +9
    -0
      Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/private/private.xml
  21. +37
    -0
      Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/project.xml

+ 96
- 0
60hz_Divider/code/arduino_parse_test/arduino_parse_test.ino View File

@ -0,0 +1,96 @@
#define HZin 4
uint32_t hzhigh[20];
uint32_t hzlow[20] ;
uint8_t x = 0;
void setup() {
// put your setup code here, to run once:
pinMode(HZin, INPUT);
Serial.begin(116200);
}
void loop() {
// put your main code here, to run repeatedly:
//if (val = pulsein < 2000) then do low, then high again
//else goto end
/*if((hzhigh[x] = pulseInLong(HZin, HIGH, 1000000UL)) < 2000){
x++
hzlow[x] = pulseInLong( HZin, HIGH, 1000000UL);
}*/
//if pulse high don't care
//if pulse low, do stuff{
// whilepulse low, time,
// while pulse high time,
// etc...
//if pulse high greater than 3ms, end
//the below is not usable
//apparently setup time is too long
if((hzlow[x] = pulseInLong(HZin,LOW, 2000000UL))){
//while(hzhigh[x] < 2000){
x++;
hzhigh[x] = pulseInLong(HZin,HIGH,2000000UL);
x++;
hzlow[x] = pulseInLong(HZin,LOW, 2000000UL);
x++;
hzhigh[x] = pulseInLong(HZin,HIGH,2000000UL);
x++;
hzlow[x] = pulseInLong(HZin,LOW, 2000000UL);
x++;
hzhigh[x] = pulseInLong(HZin,HIGH,2000000UL);
x++;
hzlow[x] = pulseInLong(HZin,LOW, 2000000UL);
x++;
hzhigh[x] = pulseInLong(HZin,HIGH,2000000UL);
x++;
hzlow[x] = pulseInLong(HZin,LOW, 2000000UL);
x++;
hzhigh[x] = pulseInLong(HZin,HIGH,2000000UL);
x++;
hzlow[x] = pulseInLong(HZin,LOW, 2000000UL);
x++;
hzhigh[x] = pulseInLong(HZin,HIGH,2000000UL);
x++;
hzlow[x] = pulseInLong(HZin,LOW, 2000000UL);
x++;
hzhigh[x] = pulseInLong(HZin,HIGH,2000000UL);
x++;
hzlow[x] = pulseInLong(HZin,LOW, 2000000UL);
}
/*
for(x=0;hzhigh[x]<2000;x++){
hzhigh[x] = pulseInLong( HZin, HIGH, 2000000UL);
hzlow[x] = pulseInLong( HZin, LOW, 2000000UL);
//hzhigh[x] = pulseInLong( HZin, HIGH, 2000000UL);
}
for(x=0;x<10;x++){
hzhigh[x] = hzhigh[x]>>5;
hzlow[x] = hzlow[x]>>5;
}*/
end:
Serial.print("\n\n\n\n");
for(x=0;x<14;x++){
Serial.print("hi:");
Serial.print(x);Serial.print(" is:");
Serial.println(hzhigh[x]);
Serial.print("low:");
Serial.print(x);Serial.print(" is:");
Serial.println(hzlow[x]);
}
for(x=0;x<14;x++){
hzhigh[x] = 0;
hzlow[x] = 0;
}
delay(100);
}

BIN
60hz_Divider/datasheets/SiT8008B-rev1p05.pdf View File


+ 1
- 3
Attiny_Solar_Energy_Harvest/code/mplab/tests8_timer_6000hz.X/nbproject/private/private.xml View File

@ -2,8 +2,6 @@
<project-private xmlns="http://www.netbeans.org/ns/project-private/1"> <project-private xmlns="http://www.netbeans.org/ns/project-private/1">
<editor-bookmarks xmlns="http://www.netbeans.org/ns/editor-bookmarks/2" lastBookmarkId="0"/> <editor-bookmarks xmlns="http://www.netbeans.org/ns/editor-bookmarks/2" lastBookmarkId="0"/>
<open-files xmlns="http://www.netbeans.org/ns/projectui-open-files/2"> <open-files xmlns="http://www.netbeans.org/ns/projectui-open-files/2">
<group>
<file>file:/home/dev/Desktop/code/electronics/attiny10_mplab_test/tests7_timer_6000hz.X/main.c</file>
</group>
<group/>
</open-files> </open-files>
</project-private> </project-private>

+ 113
- 0
Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/Makefile View File

@ -0,0 +1,113 @@
#
# There exist several targets which are by default empty and which can be
# used for execution of your targets. These targets are usually executed
# before and after some main targets. They are:
#
# .build-pre: called before 'build' target
# .build-post: called after 'build' target
# .clean-pre: called before 'clean' target
# .clean-post: called after 'clean' target
# .clobber-pre: called before 'clobber' target
# .clobber-post: called after 'clobber' target
# .all-pre: called before 'all' target
# .all-post: called after 'all' target
# .help-pre: called before 'help' target
# .help-post: called after 'help' target
#
# Targets beginning with '.' are not intended to be called on their own.
#
# Main targets can be executed directly, and they are:
#
# build build a specific configuration
# clean remove built files from a configuration
# clobber remove all built files
# all build all configurations
# help print help mesage
#
# Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and
# .help-impl are implemented in nbproject/makefile-impl.mk.
#
# Available make variables:
#
# CND_BASEDIR base directory for relative paths
# CND_DISTDIR default top distribution directory (build artifacts)
# CND_BUILDDIR default top build directory (object files, ...)
# CONF name of current configuration
# CND_ARTIFACT_DIR_${CONF} directory of build artifact (current configuration)
# CND_ARTIFACT_NAME_${CONF} name of build artifact (current configuration)
# CND_ARTIFACT_PATH_${CONF} path to build artifact (current configuration)
# CND_PACKAGE_DIR_${CONF} directory of package (current configuration)
# CND_PACKAGE_NAME_${CONF} name of package (current configuration)
# CND_PACKAGE_PATH_${CONF} path to package (current configuration)
#
# NOCDDL
# Environment
MKDIR=mkdir
CP=cp
CCADMIN=CCadmin
RANLIB=ranlib
# build
build: .build-post
.build-pre:
# Add your pre 'build' code here...
.build-post: .build-impl
# Add your post 'build' code here...
# clean
clean: .clean-post
.clean-pre:
# Add your pre 'clean' code here...
# WARNING: the IDE does not call this target since it takes a long time to
# simply run make. Instead, the IDE removes the configuration directories
# under build and dist directly without calling make.
# This target is left here so people can do a clean when running a clean
# outside the IDE.
.clean-post: .clean-impl
# Add your post 'clean' code here...
# clobber
clobber: .clobber-post
.clobber-pre:
# Add your pre 'clobber' code here...
.clobber-post: .clobber-impl
# Add your post 'clobber' code here...
# all
all: .all-post
.all-pre:
# Add your pre 'all' code here...
.all-post: .all-impl
# Add your post 'all' code here...
# help
help: .help-post
.help-pre:
# Add your pre 'help' code here...
.help-post: .help-impl
# Add your post 'help' code here...
# include project implementation makefile
include nbproject/Makefile-impl.mk
# include project make variables
include nbproject/Makefile-variables.mk

BIN
Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/build/default/production/main.o View File


+ 43
- 0
Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/build/default/production/main.o.d View File

@ -0,0 +1,43 @@
build/default/production/main.o.d build/default/production/main.o: main.c \
/opt/microchip/xc8/v2.10/avr/lib/gcc/avr/5.4.0/include/xc.h \
/opt/microchip/xc8/v2.10/avr/lib/gcc/avr/5.4.0/include/cci.h \
/opt/microchip/xc8/v2.10/avr/avr/include/avr/io.h \
/opt/microchip/xc8/v2.10/avr/avr/include/avr/sfr_defs.h \
/opt/microchip/xc8/v2.10/avr/avr/include/inttypes.h \
/opt/microchip/xc8/v2.10/avr/lib/gcc/avr/5.4.0/include/stdint.h \
/opt/microchip/xc8/v2.10/avr/avr/include/stdint.h \
/home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10/include/avr/iotn10.h \
/opt/microchip/xc8/v2.10/avr/avr/include/avr/portpins.h \
/opt/microchip/xc8/v2.10/avr/avr/include/avr/common.h \
/opt/microchip/xc8/v2.10/avr/avr/include/avr/version.h \
/opt/microchip/xc8/v2.10/avr/avr/include/avr/xmega.h \
/opt/microchip/xc8/v2.10/avr/avr/include/avr/fuse.h \
/opt/microchip/xc8/v2.10/avr/avr/include/avr/lock.h
/opt/microchip/xc8/v2.10/avr/lib/gcc/avr/5.4.0/include/xc.h:
/opt/microchip/xc8/v2.10/avr/lib/gcc/avr/5.4.0/include/cci.h:
/opt/microchip/xc8/v2.10/avr/avr/include/avr/io.h:
/opt/microchip/xc8/v2.10/avr/avr/include/avr/sfr_defs.h:
/opt/microchip/xc8/v2.10/avr/avr/include/inttypes.h:
/opt/microchip/xc8/v2.10/avr/lib/gcc/avr/5.4.0/include/stdint.h:
/opt/microchip/xc8/v2.10/avr/avr/include/stdint.h:
/home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10/include/avr/iotn10.h:
/opt/microchip/xc8/v2.10/avr/avr/include/avr/portpins.h:
/opt/microchip/xc8/v2.10/avr/avr/include/avr/common.h:
/opt/microchip/xc8/v2.10/avr/avr/include/avr/version.h:
/opt/microchip/xc8/v2.10/avr/avr/include/avr/xmega.h:
/opt/microchip/xc8/v2.10/avr/avr/include/avr/fuse.h:
/opt/microchip/xc8/v2.10/avr/avr/include/avr/lock.h:

+ 17
- 0
Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/dist/default/production/memoryfile.xml View File

@ -0,0 +1,17 @@
<?xml version="1.0" encoding="UTF-8"?>
<project>
<executable name="dist/default/production/tests9_timer_6000hz.X.production.elf">
<memory name="program">
<units>bytes</units>
<length>1024</length>
<used>64</used>
<free>960</free>
</memory>
<memory name="data">
<units>bytes</units>
<length>32</length>
<used>0</used>
<free>32</free>
</memory>
</executable>
</project>

BIN
Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/dist/default/production/tests9_timer_6000hz.X.production.elf View File


+ 7
- 0
Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/dist/default/production/tests9_timer_6000hz.X.production.hex View File

@ -0,0 +1,7 @@
:100000000AC01DC01CC01BC01AC019C018C017C030
:1000100016C015C014C011271FBFCFE5D0E0DEBF4A
:0A002000CDBF03D000C0F894FFCF5D
:10002A0048ED4CBF52E057BF4CBF48E046BF44E0E2
:04003A0040B9FECFFC
:02003E00E0CF11
:00000001FF

+ 395
- 0
Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/dist/default/production/tests9_timer_6000hz.X.production.map View File

@ -0,0 +1,395 @@
Archive member included to satisfy reference by file (symbol)
/opt/microchip/xc8/v2.10/avr/bin/../lib/gcc/avr/5.4.0/avrtiny/libgcc.a(_exit.o)
/home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10/gcc/dev/attiny10/avrtiny/crtattiny10.o (exit)
Discarded input sections
.data 0x00000000 0x0 /home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10/gcc/dev/attiny10/avrtiny/crtattiny10.o
.bss 0x00000000 0x0 /home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10/gcc/dev/attiny10/avrtiny/crtattiny10.o
.text 0x00000000 0x0 build/default/production/main.o
.data 0x00000000 0x0 build/default/production/main.o
.bss 0x00000000 0x0 build/default/production/main.o
.text 0x00000000 0x0 /opt/microchip/xc8/v2.10/avr/bin/../lib/gcc/avr/5.4.0/avrtiny/libgcc.a(_exit.o)
.data 0x00000000 0x0 /opt/microchip/xc8/v2.10/avr/bin/../lib/gcc/avr/5.4.0/avrtiny/libgcc.a(_exit.o)
.bss 0x00000000 0x0 /opt/microchip/xc8/v2.10/avr/bin/../lib/gcc/avr/5.4.0/avrtiny/libgcc.a(_exit.o)
.text.libgcc.mul
0x00000000 0x0 /opt/microchip/xc8/v2.10/avr/bin/../lib/gcc/avr/5.4.0/avrtiny/libgcc.a(_exit.o)
.text.libgcc.div
0x00000000 0x0 /opt/microchip/xc8/v2.10/avr/bin/../lib/gcc/avr/5.4.0/avrtiny/libgcc.a(_exit.o)
.text.libgcc.prologue
0x00000000 0x0 /opt/microchip/xc8/v2.10/avr/bin/../lib/gcc/avr/5.4.0/avrtiny/libgcc.a(_exit.o)
.text.libgcc 0x00000000 0x0 /opt/microchip/xc8/v2.10/avr/bin/../lib/gcc/avr/5.4.0/avrtiny/libgcc.a(_exit.o)
.text.libgcc.builtins
0x00000000 0x0 /opt/microchip/xc8/v2.10/avr/bin/../lib/gcc/avr/5.4.0/avrtiny/libgcc.a(_exit.o)
.text.libgcc.fmul
0x00000000 0x0 /opt/microchip/xc8/v2.10/avr/bin/../lib/gcc/avr/5.4.0/avrtiny/libgcc.a(_exit.o)
.text.libgcc.fixed
0x00000000 0x0 /opt/microchip/xc8/v2.10/avr/bin/../lib/gcc/avr/5.4.0/avrtiny/libgcc.a(_exit.o)
Memory Configuration
Name Origin Length Attributes
text 0x00000000 0x00000400 xr
data 0x00800040 0x00000020 rw !x
config 0x00820000 0x00000001 rw !x
lock 0x00830000 0x00000002 rw !x
signature 0x00840000 0x00000004 rw !x
*default* 0x00000000 0xffffffff
Linker script and memory map
0x00004000 __RODATA_PM_OFFSET__ = 0x4000
LOAD /home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10/gcc/dev/attiny10/avrtiny/crtattiny10.o
0x00000001 __MPLAB_BUILD = 0x1
LOAD build/default/production/main.o
START GROUP
LOAD /opt/microchip/xc8/v2.10/avr/bin/../lib/gcc/avr/5.4.0/../../../../avr/lib/avrtiny/libm.a
END GROUP
START GROUP
LOAD /opt/microchip/xc8/v2.10/avr/bin/../lib/gcc/avr/5.4.0/avrtiny/libgcc.a
LOAD /opt/microchip/xc8/v2.10/avr/bin/../lib/gcc/avr/5.4.0/../../../../avr/lib/avrtiny/libm.a
LOAD /opt/microchip/xc8/v2.10/avr/bin/../lib/gcc/avr/5.4.0/../../../../avr/lib/avrtiny/libc.a
LOAD /home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10/gcc/dev/attiny10/avrtiny/libattiny10.a
END GROUP
0x00000000 __TEXT_REGION_ORIGIN__ = DEFINED (__TEXT_REGION_ORIGIN__)?__TEXT_REGION_ORIGIN__:0x0
[0x00800040] __DATA_REGION_ORIGIN__ = DEFINED (__DATA_REGION_ORIGIN__)?__DATA_REGION_ORIGIN__:0x800040
[0x00000400] __TEXT_REGION_LENGTH__ = DEFINED (__TEXT_REGION_LENGTH__)?__TEXT_REGION_LENGTH__:0x1000
[0x00000020] __DATA_REGION_LENGTH__ = DEFINED (__DATA_REGION_LENGTH__)?__DATA_REGION_LENGTH__:0x100
[0x00000001] __FUSE_REGION_LENGTH__ = DEFINED (__FUSE_REGION_LENGTH__)?__FUSE_REGION_LENGTH__:0x2
0x00000002 __LOCK_REGION_LENGTH__ = DEFINED (__LOCK_REGION_LENGTH__)?__LOCK_REGION_LENGTH__:0x2
0x00000004 __SIGNATURE_REGION_LENGTH__ = DEFINED (__SIGNATURE_REGION_LENGTH__)?__SIGNATURE_REGION_LENGTH__:0x4
0x00004000 __RODATA_PM_OFFSET__ = DEFINED (__RODATA_PM_OFFSET__)?__RODATA_PM_OFFSET__:0x4000
.hash
*(.hash)
.dynsym
*(.dynsym)
.dynstr
*(.dynstr)
.gnu.version
*(.gnu.version)
.gnu.version_d
*(.gnu.version_d)
.gnu.version_r
*(.gnu.version_r)
.rel.init
*(.rel.init)
.rela.init
*(.rela.init)
.rel.text
*(.rel.text)
*(.rel.text.*)
*(.rel.gnu.linkonce.t*)
.rela.text
*(.rela.text)
*(.rela.text.*)
*(.rela.gnu.linkonce.t*)
.rel.fini
*(.rel.fini)
.rela.fini
*(.rela.fini)
.rel.rodata
*(.rel.rodata)
*(.rel.rodata.*)
*(.rel.gnu.linkonce.r*)
.rela.rodata
*(.rela.rodata)
*(.rela.rodata.*)
*(.rela.gnu.linkonce.r*)
.rel.data
*(.rel.data)
*(.rel.data.*)
*(.rel.gnu.linkonce.d*)
.rela.data
*(.rela.data)
*(.rela.data.*)
*(.rela.gnu.linkonce.d*)
.rel.ctors
*(.rel.ctors)
.rela.ctors
*(.rela.ctors)
.rel.dtors
*(.rel.dtors)
.rela.dtors
*(.rela.dtors)
.rel.got
*(.rel.got)
.rela.got
*(.rela.got)
.rel.bss
*(.rel.bss)
.rela.bss
*(.rela.bss)
.rel.plt
*(.rel.plt)
.rela.plt
*(.rela.plt)
.text 0x00000000 0x2a
*(.vectors)
.vectors 0x00000000 0x16 /home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10/gcc/dev/attiny10/avrtiny/crtattiny10.o
0x00000000 __vectors
0x00000000 __vector_default
*(.vectors)
*(.progmem.gcc*)
*(.dinit)
.dinit 0x00000016 0x0 data_init
0x00000016 . = ALIGN (0x2)
0x00000016 __trampolines_start = .
*(.trampolines)
.trampolines 0x00000016 0x0 linker stubs
*(.trampolines*)
0x00000016 __trampolines_end = .
*libprintf_flt.a:*(.progmem.data)
*libc.a:*(.progmem.data)
0x00000016 . = ALIGN (0x2)
*(.jumptables)
*(.jumptables*)
*(.lowtext)
*(.lowtext*)
0x00000016 __ctors_start = .
*(.ctors)
0x00000016 __ctors_end = .
0x00000016 __dtors_start = .
*(.dtors)
0x00000016 __dtors_end = .
SORT(*)(.ctors)
SORT(*)(.dtors)
*(.init0)
.init0 0x00000016 0x0 /home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10/gcc/dev/attiny10/avrtiny/crtattiny10.o
0x00000016 __init
*(.init0)
*(.init1)
*(.init1)
*(.init2)
.init2 0x00000016 0xc /home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10/gcc/dev/attiny10/avrtiny/crtattiny10.o
*(.init2)
*(.init3)
*(.init3)
*(.init4)
*(.init4)
*(.init5)
*(.init5)
*(.init6)
*(.init6)
*(.init7)
*(.init7)
*(.init8)
*(.init8)
*(.init9)
.init9 0x00000022 0x4 /home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10/gcc/dev/attiny10/avrtiny/crtattiny10.o
*(.init9)
0x00000026 . = ALIGN (0x2)
*(.fini9)
.fini9 0x00000026 0x0 /opt/microchip/xc8/v2.10/avr/bin/../lib/gcc/avr/5.4.0/avrtiny/libgcc.a(_exit.o)
0x00000026 exit
0x00000026 _exit
*(.fini9)
*(.fini8)
*(.fini8)
*(.fini7)
*(.fini7)
*(.fini6)
*(.fini6)
*(.fini5)
*(.fini5)
*(.fini4)
*(.fini4)
*(.fini3)
*(.fini3)
*(.fini2)
*(.fini2)
*(.fini1)
*(.fini1)
*(.fini0)
.fini0 0x00000026 0x4 /opt/microchip/xc8/v2.10/avr/bin/../lib/gcc/avr/5.4.0/avrtiny/libgcc.a(_exit.o)
*(.fini0)
0x0000002a _etext = .
.rodata
*(.rodata)
*(.rodata*)
*(.gnu.linkonce.r*)
.data 0x00800040 0x0 load address 0x0000002a
[!provide] PROVIDE (__data_start, .)
*(.gnu.linkonce.d*)
0x00800040 . = ALIGN (0x2)
0x00800040 _edata = .
[!provide] PROVIDE (__data_end, .)
.bss 0x00800040 0x0
[!provide] PROVIDE (__bss_start, .)
*(COMMON)
[!provide] PROVIDE (__bss_end, .)
0x0000002a __data_load_start = LOADADDR (.data)
0x0000002a __data_load_end = (__data_load_start + SIZEOF (.data))
.noinit 0x00800040 0x0
[!provide] PROVIDE (__noinit_start, .)
*(.noinit*)
[!provide] PROVIDE (__noinit_end, .)
0x00800040 _end = .
.lock
*(.lock*)
.signature
*(.signature*)
.config
*(.fuse)
*(.lfuse)
*(.hfuse)
*(.efuse)
*(.config*)
.stab
*(.stab)
.stabstr
*(.stabstr)
.stab.excl
*(.stab.excl)
.stab.exclstr
*(.stab.exclstr)
.stab.index
*(.stab.index)
.stab.indexstr
*(.stab.indexstr)
.comment 0x00000000 0x2f
*(.comment)
.comment 0x00000000 0x2f build/default/production/main.o
0x30 (size before relaxing)
.note.gnu.build-id
*(.note.gnu.build-id)
.debug
*(.debug)
.line
*(.line)
.debug_srcinfo
*(.debug_srcinfo)
.debug_sfnames
*(.debug_sfnames)
.debug_aranges 0x00000000 0x20
*(.debug_aranges)
.debug_aranges
0x00000000 0x20 build/default/production/main.o
.debug_pubnames
*(.debug_pubnames)
.debug_info 0x00000000 0x53d
*(.debug_info .gnu.linkonce.wi.*)
.debug_info 0x00000000 0x305 /home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10/gcc/dev/attiny10/avrtiny/crtattiny10.o
.debug_info 0x00000305 0x238 build/default/production/main.o
.debug_abbrev 0x00000000 0x324
*(.debug_abbrev)
.debug_abbrev 0x00000000 0x2d9 /home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10/gcc/dev/attiny10/avrtiny/crtattiny10.o
.debug_abbrev 0x000002d9 0x4b build/default/production/main.o
.debug_line 0x00000000 0x16d
*(.debug_line .debug_line.* .debug_line_end)
.debug_line 0x00000000 0xd9 /home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10/gcc/dev/attiny10/avrtiny/crtattiny10.o
.debug_line 0x000000d9 0x94 build/default/production/main.o
.debug_frame 0x00000000 0x24
*(.debug_frame)
.debug_frame 0x00000000 0x24 build/default/production/main.o
.debug_str 0x00000000 0x115
*(.debug_str)
.debug_str 0x00000000 0x115 /home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10/gcc/dev/attiny10/avrtiny/crtattiny10.o
.debug_str 0x00000115 0x0 build/default/production/main.o
.debug_loc
*(.debug_loc)
.debug_macinfo
*(.debug_macinfo)
.debug_weaknames
*(.debug_weaknames)
.debug_funcnames
*(.debug_funcnames)
.debug_typenames
*(.debug_typenames)
.debug_varnames
*(.debug_varnames)
.debug_pubtypes
*(.debug_pubtypes)
.debug_ranges 0x00000000 0x10
*(.debug_ranges)
.debug_ranges 0x00000000 0x10 build/default/production/main.o
.debug_macro
*(.debug_macro)
OUTPUT(dist/default/production/tests9_timer_6000hz.X.production.elf elf32-avr)
LOAD linker stubs
LOAD data_init
.note.gnu.avr.deviceinfo
0x00000000 0x3c
.note.gnu.avr.deviceinfo
0x00000000 0x3c /home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10/gcc/dev/attiny10/avrtiny/crtattiny10.o
.text.main 0x0000002a 0x14
.text.main 0x0000002a 0x14 build/default/production/main.o
0x0000002a main
.text 0x0000003e 0x2
.text 0x0000003e 0x2 /home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10/gcc/dev/attiny10/avrtiny/crtattiny10.o
0x0000003e __vector_1
0x0000003e __bad_interrupt
0x0000003e __vector_6
0x0000003e __vector_3
0x0000003e __vector_7
0x0000003e __vector_5
0x0000003e __vector_4
0x0000003e __vector_9
0x0000003e __vector_2
0x0000003e __vector_8
0x0000003e __vector_10

+ 305
- 0
Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/main.c View File

@ -0,0 +1,305 @@
#include <xc.h>
#include <avr/io.h>
//this req'd for (and before calling) delay
//see delay.h
//compiler optimizations must also be enabled
//#define F_CPU 1536000
//#include <util/delay.h>
//#include <avr/interrupt.h>
//#include <avr/sleep.h>
//#include <util/atomic.h>
//#include <avr/wdt.h>
//tests5 tested and works (at ~950hz). unplug cable to programmer to see pin 4 active.
//however...
//tests6 DEADEND
//never worked right. giving up and using delay.
//reference: https://www.avrfreaks.net/forum/sample-project-attiny10
//https://blog.podkalicki.com/attiny13-blinky-with-timer-compa/
//watchdog is too slow and inaccurate to get 6000Hz
//ISR(TIM0_COMPA_vect)
//{
// // Toggle PB2 Hi/Low depending on current state
// PINB = 1<<2;
// TIFR0 |= 1<<OCF0A; //clear flag (is this required here? documentation unclear)
// //PORTB ^= _BV(LED_PIN); // toggle LED pin
//}
/*
Delay in powerdown mode. Wake up by watchdog interrupt.
* //NOTE: see earlier code, e.g. tests3 in attiny10 elec projects 2020
*/
/*
void delay_power_down_wdt(uint8_t wdto)
{
wdt_reset();
wdt_enable(wdto);
WDTCSR |= (1<<WDIE);
//so far (with 128Khz clk) this sleep will be about 30-40 seconds.
//(however, I'll add the below to)
//adjust sleep speed here:
// 0110 is 1hz at 128KHz
//WDTCSR |= (0<< WDP3);
//WDTCSR |= (1<< WDP2);
//WDTCSR |= (1<< WDP1);
//WDTCSR |= (0<< WDP0);
set_sleep_mode(SLEEP_MODE_PWR_DOWN);
sleep_enable();
// Make sure interrups are enabled and the I flag is restored
NONATOMIC_BLOCK(NONATOMIC_RESTORESTATE)
{
sleep_cpu();
wdt_disable();
}
sleep_disable();
}
*/
int main(void)
{
//// //Write CCP (to enable changing clock)
CCP = 0xD8;
//// //change CLK to 128KHz:
// CLKMSR = 0b01;
//change clk to 8mhz:
//CLKMSR = 0b00;
//use external clk:
CLKMSR = 0b10;
//again need CCP (to enable changing prescaler (this time))
CCP = 0xD8;
//clock prescaler from divide by 8 (defualt) to none
// prescaler of 1:
//CLKPSR = 0b0000;
// prescaler of 256:
CLKPSR = 0b1000;
//notes: test results (osccal is 8 bit)
// osccal | hz output
// 0xe6 10khz
// 0x06 3.58khz
// 0x0F 3.83Khz
// 0x2F 4.62Khz
// 0x5F 5.84Khz
// 0x65 6.003KHz -winrar (for this chip))
// 0x8F 7.27Khz
//OSCCAL = 0x65;
//////// OCR0A = 0;
//////// TCNT0 = 0;
//////// TCCR0A = 0;
//////// TCCR0B = 0;
////////
//////// TCCR0A |= _BV(WGM01); // set timer counter mode to CTC
//////// // TCCR0B |= _BV(CS02)|_BV(CS00); // set prescaler to 1024 (CLK=1200000Hz/1024/256=4.57Hz, 0.22s)
//////// TCCR0B |= _BV(CS00); // set prescaler to 1 (CLK=1MHz/1)
//OCR0A is 16 bits. in ASM it must be loaded separately.
//in C, it can be loaded > 256? (test)
//520 about 950hz, 25us wide pulse
//OCR0A = 520; // with one timer, ever 166.667hz we want to count once (3000hz)
//OCR0A = 1; //475hz
//this goes to 475hz (pulses). doesn't make sense.
//// OCR0AH = 0xFF; //
//// OCR0AL = 0xFF;
//attiny10 output compare broken apparently
//this still 960hz, with 100us or so pulse size (high is 100us, low is longer)
//OCR0A = 100;
//inline asm to load values into 16 bit register
//; variables
//; For 1 Hz output, the timer delay has to be 1/2 second (1/2 second on / 1/2 second off)
//; delay = OCR0A * 1024 * 8 / 8000000
//; for 1/2 second, OCR0A = 488 (0x01E8)
//.EQU OCR0AHigh = 0x01
//.EQU OCR0ALow = 0xe8
// in bash type: printf "%x\n" 488
//.EQU OCR0AHigh = 0x02
//.EQU OCR0ALow = 0x08
// ldi r17, OCR0AHigh //; Sets the output compare register value
//ldi r16, OCR0ALow
//this asm doesn't work (why?) //perhaps OCR0A is really just 8 bits on attiny10...?)
////// asm volatile(
////// "ldi r17, 0x02"
////// "ldi r16, 0x08"
////// "out OCR0AH, r17"
////// "out OCR0AL, r16"
////// );
//this asm works
// asm volatile("nop\n\t"
//"nop\n\t"
//"nop\n\t"
//"nop\n\t"
//::);
////////
//////// TIMSK0 |= _BV(OCIE0A); // enable Timer CTC interrupt
////////
// PB2 change to output
// DDRB = 1<<2;
//// sei();
//int x = 0;
while(1)
{
//this goes about 60.3KHz.
//experiment FAIL
//will just buy a 6KHz oscillator.
PINB = 1<<2;
//EDIT: disabled optimization in mplab (level 0)
//and ended up geting much slower IO
//asm("nop;");
//for(x=0;x<10;x++){
//note it's _delay_us not delay_us
//delay_us(1) is 44.3KHz
//_delay_us(8); //9 is 6.4KHz, 8 is roughly 7.2KHz
//delay_us(10) is 5.8KHz
//not much granularity there...)
//so adding the following...
//////////// if( x == 3){
//////////// _delay_us(4);//these two are 5.98 or so KHz
//////////// x = 0;
//////////// goto jump;
//////////// }
////////////
//////////// //NOTE: the above ends up causing an ugly looking clock. may not matter
//////////// //for fpga clocking off of rising edge, BUT, it is ugly, should remove,
//////////// //and just do single delay. Will do in part 9.
////////////
//////////// x++;
//////////// jump:
//////////// //in combination with the jump, gives closer to 6KHz
//////////// _delay_us(8);
///below didn't work out, so using osccal
//bit convuluted anyways
/*if( x == 4){
_delay_us(1);
//x = 0;
goto jump;
}
if( x == 8){
_delay_us(2);
x = 0;
goto jump;
}
x++;
jump:
//in combination with the jump, gives closer to 6KHz
_delay_us(8);*/
//the above idles at 5.98 - 5.99KHz.
//best so far.
//Now, calibrate oscillator with OSCCAL
//if more accuracy desired.
//or adjust if clause above
//tried to make my own delay in ASM, BUT
//compiler keeps optimizing it out (even w/out optimization enabled)
//... some other flag may be culprit. So instead will use delay_us. Two delay
//functions are delay_ms and delay_us. see headers at top and delay.h)
/* __asm__("mov r16, r17;"
"mov r17, r16;"
"inc r16;"
"dec r16;"
"mov r16, r17;"
"mov r17, r16;"
"inc r16;"
"dec r16;"
"clr r16;"
"clr r17;"
"clr r18;"
"clr r19;"
"clr r20;"
"clr r21;"
"clr r22;"
"clr r23;"
"mov r16, r17;"
"mov r17, r16;"
"inc r16;"
"dec r16;"
"mov r16, r17;"
"mov r17, r16;"
"clr r16;"
"clr r17;"
"clr r18;"
"clr r19;"
"clr r20;"
"clr r21;"
"clr r22;"
"clr r23;"
"mov r16, r17;"
"mov r17, r16;"
"inc r16;"
"dec r16;"
"mov r16, r17;"
"mov r17, r16;"
);*/
//mplab delay is:
/** \ingroup util_delay_basic
Delay loop using an 8-bit counter \c __count, so up to 256
iterations are possible. (The value 256 would have to be passed
as 0.) The loop executes three CPU cycles per iteration, not
including the overhead the compiler needs to setup the counter
register.
Thus, at a CPU speed of 1 MHz, delays of up to 768 microseconds
can be achieved.
*/
//////////void
//////////_delay_loop_1(uint8_t __count)
//////////{
////////// __asm__ volatile (
////////// "1: dec %0" "\n\t"
////////// "brne 1b"
////////// : "=r" (__count)
////////// : "0" (__count)
////////// );
//////////}
//////////
//////////
//ignore below
// asm("nop;""nop;""nop;""nop;""nop;"
//"nop;""nop;"//"nop;""nop;"//"nop;""nop;"
//);
//}//just this asm block is about 121.22KHz
}
}

+ 158
- 0
Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/Makefile-default.mk View File

@ -0,0 +1,158 @@
#
# Generated Makefile - do not edit!
#
# Edit the Makefile in the project folder instead (../Makefile). Each target
# has a -pre and a -post target defined where you can add customized code.
#
# This makefile implements configuration specific macros and targets.
# Include project Makefile
ifeq "${IGNORE_LOCAL}" "TRUE"
# do not include local makefile. User is passing all local related variables already
else
include Makefile
# Include makefile containing local settings
ifeq "$(wildcard nbproject/Makefile-local-default.mk)" "nbproject/Makefile-local-default.mk"
include nbproject/Makefile-local-default.mk
endif
endif
# Environment
MKDIR=mkdir -p
RM=rm -f
MV=mv
CP=cp
# Macros
CND_CONF=default
ifeq ($(TYPE_IMAGE), DEBUG_RUN)
IMAGE_TYPE=debug
OUTPUT_SUFFIX=elf
DEBUGGABLE_SUFFIX=elf
FINAL_IMAGE=dist/${CND_CONF}/${IMAGE_TYPE}/tests9_timer_6000hz.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
else
IMAGE_TYPE=production
OUTPUT_SUFFIX=hex
DEBUGGABLE_SUFFIX=elf
FINAL_IMAGE=dist/${CND_CONF}/${IMAGE_TYPE}/tests9_timer_6000hz.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
endif
ifeq ($(COMPARE_BUILD), true)
COMPARISON_BUILD=
else
COMPARISON_BUILD=
endif
ifdef SUB_IMAGE_ADDRESS
else
SUB_IMAGE_ADDRESS_COMMAND=
endif
# Object Directory
OBJECTDIR=build/${CND_CONF}/${IMAGE_TYPE}
# Distribution Directory
DISTDIR=dist/${CND_CONF}/${IMAGE_TYPE}
# Source Files Quoted if spaced
SOURCEFILES_QUOTED_IF_SPACED=main.c
# Object Files Quoted if spaced
OBJECTFILES_QUOTED_IF_SPACED=${OBJECTDIR}/main.o
POSSIBLE_DEPFILES=${OBJECTDIR}/main.o.d
# Object Files
OBJECTFILES=${OBJECTDIR}/main.o
# Source Files
SOURCEFILES=main.c
CFLAGS=
ASFLAGS=
LDLIBSOPTIONS=
############# Tool locations ##########################################
# If you copy a project from one host to another, the path where the #
# compiler is installed may be different. #
# If you open this project with MPLAB X in the new host, this #
# makefile will be regenerated and the paths will be corrected. #
#######################################################################
# fixDeps replaces a bunch of sed/cat/printf statements that slow down the build
FIXDEPS=fixDeps
.build-conf: ${BUILD_SUBPROJECTS}
ifneq ($(INFORMATION_MESSAGE), )
@echo $(INFORMATION_MESSAGE)
endif
${MAKE} -f nbproject/Makefile-default.mk dist/${CND_CONF}/${IMAGE_TYPE}/tests9_timer_6000hz.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
MP_PROCESSOR_OPTION=ATtiny10
# ------------------------------------------------------------------------------------
# Rules for buildStep: compile
ifeq ($(TYPE_IMAGE), DEBUG_RUN)
${OBJECTDIR}/main.o: main.c nbproject/Makefile-${CND_CONF}.mk
@${MKDIR} "${OBJECTDIR}"
@${RM} ${OBJECTDIR}/main.o.d
@${RM} ${OBJECTDIR}/main.o
${MP_CC} $(MP_EXTRA_CC_PRE) -mcpu=$(MP_PROCESSOR_OPTION) -c -D__DEBUG=1 -g -DDEBUG -gdwarf-2 -x c -D__$(MP_PROCESSOR_OPTION)__ -mdfp="/home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10" -Wl,--gc-sections -O1 -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -funsigned-char -funsigned-bitfields -Wall -DXPRJ_default=$(CND_CONF) $(COMPARISON_BUILD) -gdwarf-3 -MD -MP -MF "${OBJECTDIR}/main.o.d" -MT "${OBJECTDIR}/main.o.d" -MT ${OBJECTDIR}/main.o -o ${OBJECTDIR}/main.o main.c
else
${OBJECTDIR}/main.o: main.c nbproject/Makefile-${CND_CONF}.mk
@${MKDIR} "${OBJECTDIR}"
@${RM} ${OBJECTDIR}/main.o.d
@${RM} ${OBJECTDIR}/main.o
${MP_CC} $(MP_EXTRA_CC_PRE) -mcpu=$(MP_PROCESSOR_OPTION) -c -x c -D__$(MP_PROCESSOR_OPTION)__ -mdfp="/home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10" -Wl,--gc-sections -O1 -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -funsigned-char -funsigned-bitfields -Wall -DXPRJ_default=$(CND_CONF) $(COMPARISON_BUILD) -gdwarf-3 -MD -MP -MF "${OBJECTDIR}/main.o.d" -MT "${OBJECTDIR}/main.o.d" -MT ${OBJECTDIR}/main.o -o ${OBJECTDIR}/main.o main.c
endif
# ------------------------------------------------------------------------------------
# Rules for buildStep: assemble
ifeq ($(TYPE_IMAGE), DEBUG_RUN)
else
endif
# ------------------------------------------------------------------------------------
# Rules for buildStep: assembleWithPreprocess
ifeq ($(TYPE_IMAGE), DEBUG_RUN)
else
endif
# ------------------------------------------------------------------------------------
# Rules for buildStep: link
ifeq ($(TYPE_IMAGE), DEBUG_RUN)
dist/${CND_CONF}/${IMAGE_TYPE}/tests9_timer_6000hz.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES} nbproject/Makefile-${CND_CONF}.mk
@${MKDIR} dist/${CND_CONF}/${IMAGE_TYPE}
${MP_CC} $(MP_EXTRA_LD_PRE) -mcpu=$(MP_PROCESSOR_OPTION) -Wl,-Map=dist/${CND_CONF}/${IMAGE_TYPE}/tests9_timer_6000hz.X.${IMAGE_TYPE}.map -D__DEBUG=1 -DXPRJ_default=$(CND_CONF) -Wl,--defsym=__MPLAB_BUILD=1 -mdfp="/home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10" -gdwarf-2 -Wl,--gc-sections -O1 -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -funsigned-char -funsigned-bitfields -Wall -gdwarf-3 $(COMPARISON_BUILD) -Wl,--memorysummary,dist/${CND_CONF}/${IMAGE_TYPE}/memoryfile.xml -o dist/${CND_CONF}/${IMAGE_TYPE}/tests9_timer_6000hz.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} -o dist/${CND_CONF}/${IMAGE_TYPE}/tests9_timer_6000hz.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX} ${OBJECTFILES_QUOTED_IF_SPACED} -Wl,--start-group -Wl,-lm -Wl,--end-group -Wl,--defsym=__MPLAB_DEBUG=1,--defsym=__DEBUG=1
@${RM} dist/${CND_CONF}/${IMAGE_TYPE}/tests9_timer_6000hz.X.${IMAGE_TYPE}.hex
else
dist/${CND_CONF}/${IMAGE_TYPE}/tests9_timer_6000hz.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES} nbproject/Makefile-${CND_CONF}.mk
@${MKDIR} dist/${CND_CONF}/${IMAGE_TYPE}
${MP_CC} $(MP_EXTRA_LD_PRE) -mcpu=$(MP_PROCESSOR_OPTION) -Wl,-Map=dist/${CND_CONF}/${IMAGE_TYPE}/tests9_timer_6000hz.X.${IMAGE_TYPE}.map -DXPRJ_default=$(CND_CONF) -Wl,--defsym=__MPLAB_BUILD=1 -mdfp="/home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10" -Wl,--gc-sections -O1 -ffunction-sections -fdata-sections -fpack-struct -fshort-enums -funsigned-char -funsigned-bitfields -Wall -gdwarf-3 $(COMPARISON_BUILD) -Wl,--memorysummary,dist/${CND_CONF}/${IMAGE_TYPE}/memoryfile.xml -o dist/${CND_CONF}/${IMAGE_TYPE}/tests9_timer_6000hz.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} -o dist/${CND_CONF}/${IMAGE_TYPE}/tests9_timer_6000hz.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} ${OBJECTFILES_QUOTED_IF_SPACED} -Wl,--start-group -Wl,-lm -Wl,--end-group
${MP_CC_DIR}/avr-objcopy -O ihex "dist/${CND_CONF}/${IMAGE_TYPE}/tests9_timer_6000hz.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX}" "dist/${CND_CONF}/${IMAGE_TYPE}/tests9_timer_6000hz.X.${IMAGE_TYPE}.hex"
endif
# Subprojects
.build-subprojects:
# Subprojects
.clean-subprojects:
# Clean Targets
.clean-conf: ${CLEAN_SUBPROJECTS}
${RM} -r build/default
${RM} -r dist/default
# Enable dependency checking
.dep.inc: .depcheck-impl
DEPFILES=$(shell "${PATH_TO_IDE_BIN}"mplabwildcard ${POSSIBLE_DEPFILES})
ifneq (${DEPFILES},)
include ${DEPFILES}
endif

+ 10
- 0
Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/Makefile-genesis.properties View File

@ -0,0 +1,10 @@
#
#Sat Aug 01 22:05:40 EDT 2020
default.Pack.dfplocation=/home/dev/.mchp_packs/Microchip/ATtiny_DFP/2.0.10
default.languagetoolchain.dir=/opt/microchip/xc8/v2.10/bin
configurations-xml=5e854234238a55dafe0eba84ce6d1401
com-microchip-mplab-nbide-embedded-makeproject-MakeProject.md5=6e453b0cf7f7da72a932cfdb2f655401
default.languagetoolchain.version=2.10
host.platform=linux
conf.ids=default
default.com-microchip-mplab-nbide-toolchainXC8-XC8LanguageToolchain.md5=23d12c447ed4f9462f01e2202bc2f36a

+ 69
- 0
Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/Makefile-impl.mk View File

@ -0,0 +1,69 @@
#
# Generated Makefile - do not edit!
#
# Edit the Makefile in the project folder instead (../Makefile). Each target
# has a pre- and a post- target defined where you can add customization code.
#
# This makefile implements macros and targets common to all configurations.
#
# NOCDDL
# Building and Cleaning subprojects are done by default, but can be controlled with the SUB
# macro. If SUB=no, subprojects will not be built or cleaned. The following macro
# statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf
# and .clean-reqprojects-conf unless SUB has the value 'no'
SUB_no=NO
SUBPROJECTS=${SUB_${SUB}}
BUILD_SUBPROJECTS_=.build-subprojects
BUILD_SUBPROJECTS_NO=
BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}}
CLEAN_SUBPROJECTS_=.clean-subprojects
CLEAN_SUBPROJECTS_NO=
CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}}
# Project Name
PROJECTNAME=tests9_timer_6000hz.X
# Active Configuration
DEFAULTCONF=default
CONF=${DEFAULTCONF}
# All Configurations
ALLCONFS=default
# build
.build-impl: .build-pre
${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-conf
# clean
.clean-impl: .clean-pre
${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .clean-conf
# clobber
.clobber-impl: .clobber-pre .depcheck-impl
${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default clean
# all
.all-impl: .all-pre .depcheck-impl
${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default build
# dependency checking support
.depcheck-impl:
# @echo "# This code depends on make tool being used" >.dep.inc
# @if [ -n "${MAKE_VERSION}" ]; then \
# echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES}))" >>.dep.inc; \
# echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \
# echo "include \$${DEPFILES}" >>.dep.inc; \
# echo "endif" >>.dep.inc; \
# else \
# echo ".KEEP_STATE:" >>.dep.inc; \
# echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \
# fi

+ 36
- 0
Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/Makefile-local-default.mk View File

@ -0,0 +1,36 @@
#
# Generated Makefile - do not edit!
#
#
# This file contains information about the location of compilers and other tools.
# If you commmit this file into your revision control server, you will be able to
# to checkout the project and build it from the command line with make. However,
# if more than one person works on the same project, then this file might show
# conflicts since different users are bound to have compilers in different places.
# In that case you might choose to not commit this file and let MPLAB X recreate this file
# for each user. The disadvantage of not commiting this file is that you must run MPLAB X at
# least once so the file gets created and the project can be built. Finally, you can also
# avoid using this file at all if you are only building from the command line with make.
# You can invoke make with the values of the macros:
# $ makeMP_CC="/opt/microchip/mplabc30/v3.30c/bin/pic30-gcc" ...
#
PATH_TO_IDE_BIN=/opt/microchip/mplabx/v5.25/mplab_platform/platform/../mplab_ide/modules/../../bin/
# Adding MPLAB X bin directory to path.
PATH:=/opt/microchip/mplabx/v5.25/mplab_platform/platform/../mplab_ide/modules/../../bin/:$(PATH)
# Path to java used to run MPLAB X when this makefile was created
MP_JAVA_PATH="/opt/microchip/mplabx/v5.25/sys/java/jre1.8.0_181/bin/"
OS_CURRENT="$(shell uname -s)"
MP_CC="/opt/microchip/xc8/v2.10/bin/xc8-cc"
# MP_CPPC is not defined
# MP_BC is not defined
MP_AS="/opt/microchip/xc8/v2.10/bin/xc8-cc"
MP_LD="/opt/microchip/xc8/v2.10/bin/xc8-cc"
MP_AR="/opt/microchip/xc8/v2.10/bin/xc8-ar"
DEP_GEN=${MP_JAVA_PATH}java -jar "/opt/microchip/mplabx/v5.25/mplab_platform/platform/../mplab_ide/modules/../../bin/extractobjectdependencies.jar"
MP_CC_DIR="/opt/microchip/xc8/v2.10/bin"
# MP_CPPC_DIR is not defined
# MP_BC_DIR is not defined
MP_AS_DIR="/opt/microchip/xc8/v2.10/bin"
MP_LD_DIR="/opt/microchip/xc8/v2.10/bin"
MP_AR_DIR="/opt/microchip/xc8/v2.10/bin"
# MP_BC_DIR is not defined

+ 13
- 0
Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/Makefile-variables.mk View File

@ -0,0 +1,13 @@
#
# Generated - do not edit!
#
# NOCDDL
#
CND_BASEDIR=`pwd`
# default configuration
CND_ARTIFACT_DIR_default=dist/default/production
CND_ARTIFACT_NAME_default=tests9_timer_6000hz.X.production.hex
CND_ARTIFACT_PATH_default=dist/default/production/tests9_timer_6000hz.X.production.hex
CND_PACKAGE_DIR_default=${CND_DISTDIR}/default/package
CND_PACKAGE_NAME_default=tests9timer6000hz.x.tar
CND_PACKAGE_PATH_default=${CND_DISTDIR}/default/package/tests9timer6000hz.x.tar

+ 73
- 0
Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/Package-default.bash View File

@ -0,0 +1,73 @@
#!/bin/bash -x
#
# Generated - do not edit!
#
# Macros
TOP=`pwd`
CND_CONF=default
CND_DISTDIR=dist
TMPDIR=build/${CND_CONF}/${IMAGE_TYPE}/tmp-packaging
TMPDIRNAME=tmp-packaging
OUTPUT_PATH=dist/${CND_CONF}/${IMAGE_TYPE}/tests9_timer_6000hz.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
OUTPUT_BASENAME=tests9_timer_6000hz.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
PACKAGE_TOP_DIR=tests9timer6000hz.x/
# Functions
function checkReturnCode
{
rc=$?
if [ $rc != 0 ]
then
exit $rc
fi
}
function makeDirectory
# $1 directory path
# $2 permission (optional)
{
mkdir -p "$1"
checkReturnCode
if [ "$2" != "" ]
then
chmod $2 "$1"
checkReturnCode
fi
}
function copyFileToTmpDir
# $1 from-file path
# $2 to-file path
# $3 permission
{
cp "$1" "$2"
checkReturnCode
if [ "$3" != "" ]
then
chmod $3 "$2"
checkReturnCode
fi
}
# Setup
cd "${TOP}"
mkdir -p ${CND_DISTDIR}/${CND_CONF}/package
rm -rf ${TMPDIR}
mkdir -p ${TMPDIR}
# Copy files and create directories and links
cd "${TOP}"
makeDirectory ${TMPDIR}/tests9timer6000hz.x/bin
copyFileToTmpDir "${OUTPUT_PATH}" "${TMPDIR}/${PACKAGE_TOP_DIR}bin/${OUTPUT_BASENAME}" 0755
# Generate tar file
cd "${TOP}"
rm -f ${CND_DISTDIR}/${CND_CONF}/package/tests9timer6000hz.x.tar
cd ${TMPDIR}
tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/package/tests9timer6000hz.x.tar *
checkReturnCode
# Cleanup
cd "${TOP}"
rm -rf ${TMPDIR}

+ 160
- 0
Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/configurations.xml View File

@ -0,0 +1,160 @@
<?xml version="1.0" encoding="UTF-8"?>
<configurationDescriptor version="65">
<logicalFolder name="root" displayName="root" projectFiles="true">
<logicalFolder name="HeaderFiles"
displayName="Header Files"
projectFiles="true">
</logicalFolder>
<logicalFolder name="LinkerScript"
displayName="Linker Files"
projectFiles="true">
</logicalFolder>
<logicalFolder name="SourceFiles"
displayName="Source Files"
projectFiles="true">
<itemPath>main.c</itemPath>
</logicalFolder>
<logicalFolder name="ExternalFiles"
displayName="Important Files"
projectFiles="false">
<itemPath>Makefile</itemPath>
</logicalFolder>
</logicalFolder>
<projectmakefile>Makefile</projectmakefile>
<confs>
<conf name="default" type="2">
<toolsSet>
<developmentServer>localhost</developmentServer>
<targetDevice>ATtiny10</targetDevice>
<targetHeader></targetHeader>
<targetPluginBoard></targetPluginBoard>
<platformTool></platformTool>
<languageToolchain>XC8</languageToolchain>
<languageToolchainVersion>2.10</languageToolchainVersion>
<platform>2</platform>
</toolsSet>
<packs>
<pack name="ATtiny_DFP" vendor="Microchip" version="2.0.10"/>
</packs>
<compileType>
<linkerTool>
<linkerLibItems>
</linkerLibItems>
</linkerTool>
<archiverTool>
</archiverTool>
<loading>
<useAlternateLoadableFile>false</useAlternateLoadableFile>
<parseOnProdLoad>false</parseOnProdLoad>
<alternateLoadableFile></alternateLoadableFile>
</loading>
<subordinates>
</subordinates>
</compileType>
<makeCustomizationType>
<makeCustomizationPreStepEnabled>false</makeCustomizationPreStepEnabled>
<makeCustomizationPreStep></makeCustomizationPreStep>
<makeCustomizationPostStepEnabled>false</makeCustomizationPostStepEnabled>
<makeCustomizationPostStep></makeCustomizationPostStep>
<makeCustomizationPutChecksumInUserID>false</makeCustomizationPutChecksumInUserID>
<makeCustomizationEnableLongLines>false</makeCustomizationEnableLongLines>
<makeCustomizationNormalizeHexFile>false</makeCustomizationNormalizeHexFile>
</makeCustomizationType>
<HI-TECH-COMP>
<property key="additional-warnings" value="true"/>
<property key="asmlist" value="true"/>
<property key="default-bitfield-type" value="true"/>
<property key="default-char-type" value="true"/>
<property key="define-macros" value=""/>
<property key="disable-optimizations" value="false"/>
<property key="extra-include-directories" value=""/>
<property key="favor-optimization-for" value="-speed,+space"/>
<property key="garbage-collect-data" value="true"/>
<property key="garbage-collect-functions" value="true"/>
<property key="identifier-length" value="255"/>
<property key="local-generation" value="false"/>
<property key="operation-mode" value="free"/>
<property key="opt-xc8-compiler-strict_ansi" value="false"/>
<property key="optimization-assembler" value="true"/>
<property key="optimization-assembler-files" value="true"/>
<property key="optimization-debug" value="false"/>
<property key="optimization-invariant-enable" value="false"/>
<property key="optimization-invariant-value" value="16"/>
<property key="optimization-level" value="-O1"/>
<property key="optimization-speed" value="false"/>
<property key="optimization-stable-enable" value="false"/>
<property key="pack-struct" value="true"/>
<property key="preprocess-assembler" value="true"/>
<property key="short-enums" value="true"/>
<property key="undefine-macros" value=""/>
<property key="use-cci" value="false"/>
<property key="use-iar" value="false"/>
<property key="verbose" value="false"/>
<property key="warning-level" value="-3"/>
<property key="what-to-do" value="ignore"/>
</HI-TECH-COMP>
<HI-TECH-LINK>
<property key="additional-options-checksum" value=""/>
<property key="additional-options-code-offset" value=""/>
<property key="additional-options-command-line" value=""/>
<property key="additional-options-errata" value=""/>
<property key="additional-options-extend-address" value="false"/>
<property key="additional-options-trace-type" value=""/>
<property key="additional-options-use-response-files" value="false"/>
<property key="backup-reset-condition-flags" value="false"/>
<property key="calibrate-oscillator" value="false"/>
<property key="calibrate-oscillator-value" value="0x3400"/>
<property key="clear-bss" value="true"/>
<property key="code-model-external" value="wordwrite"/>
<property key="code-model-rom" value=""/>
<property key="create-html-files" value="false"/>
<property key="data-model-ram" value=""/>
<property key="data-model-size-of-double" value="24"/>
<property key="data-model-size-of-double-gcc" value="no-short-double"/>
<property key="data-model-size-of-float" value="24"/>
<property key="data-model-size-of-float-gcc" value="no-short-float"/>
<property key="display-class-usage" value="false"/>
<property key="display-hex-usage" value="false"/>
<property key="display-overall-usage" value="true"/>
<property key="display-psect-usage" value="false"/>
<property key="extra-lib-directories" value=""/>
<property key="fill-flash-options-addr" value=""/>
<property key="fill-flash-options-const" value=""/>
<property key="fill-flash-options-how" value="0"/>
<property key="fill-flash-options-inc-const" value="1"/>
<property key="fill-flash-options-increment" value=""/>
<property key="fill-flash-options-seq" value=""/>
<property key="fill-flash-options-what" value="0"/>
<property key="format-hex-file-for-download" value="false"/>
<property key="initialize-data" value="true"/>
<property key="input-libraries" value="libm"/>
<property key="keep-generated-startup.as" value="false"/>
<property key="link-in-c-library" value="true"/>
<property key="link-in-c-library-gcc" value=""/>
<property key="link-in-peripheral-library" value="false"/>
<property key="managed-stack" value="false"/>
<property key="opt-xc8-linker-file" value="false"/>
<property key="opt-xc8-linker-link_startup" value="false"/>
<property key="opt-xc8-linker-serial" value=""/>
<property key="program-the-device-with-default-config-words" value="true"/>
<property key="remove-unused-sections" value="true"/>
</HI-TECH-LINK>
<XC8-CO>
<property key="coverage-enable" value=""/>
</XC8-CO>
<XC8-config-global>
<property key="advanced-elf" value="true"/>
<property key="gcc-opt-driver-new" value="true"/>
<property key="gcc-opt-std" value="-std=c99"/>
<property key="gcc-output-file-format" value="dwarf-3"/>
<property key="omit-pack-options" value="false"/>
<property key="output-file-format" value="-mcof,+elf"/>
<property key="stack-size-high" value="auto"/>
<property key="stack-size-low" value="auto"/>
<property key="stack-size-main" value="auto"/>
<property key="stack-type" value="compiled"/>
<property key="user-pack-device-support" value=""/>
</XC8-config-global>
</conf>
</confs>
</configurationDescriptor>

+ 25
- 0
Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/private/configurations.xml View File

@ -0,0 +1,25 @@
<?xml version="1.0" encoding="UTF-8"?>
<configurationDescriptor version="65">
<projectmakefile>Makefile</projectmakefile>
<defaultConf>0</defaultConf>
<confs>
<conf name="default" type="2">
<platformToolSN></platformToolSN>
<languageToolchainDir>/opt/microchip/xc8/v2.10/bin</languageToolchainDir>
<mdbdebugger version="1">
<placeholder1>place holder 1</placeholder1>
<placeholder2>place holder 2</placeholder2>
</mdbdebugger>
<runprofile version="6">
<args></args>
<rundir></rundir>
<buildfirst>true</buildfirst>
<console-type>0</console-type>
<terminal-type>0</terminal-type>
<remove-instrumentation>0</remove-instrumentation>
<environment>
</environment>
</runprofile>
</conf>
</confs>
</configurationDescriptor>

+ 9
- 0
Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/private/private.xml View File

@ -0,0 +1,9 @@
<?xml version="1.0" encoding="UTF-8"?>
<project-private xmlns="http://www.netbeans.org/ns/project-private/1">
<editor-bookmarks xmlns="http://www.netbeans.org/ns/editor-bookmarks/2" lastBookmarkId="0"/>
<open-files xmlns="http://www.netbeans.org/ns/projectui-open-files/2">
<group>
<file>file:/home/dev/Desktop/code/electronics/attiny10_mplab_test/tests9_timer_6000hz.X/main.c</file>
</group>
</open-files>
</project-private>

+ 37
- 0
Attiny_Solar_Energy_Harvest/code/mplab/tests9_timer_6000hz.X/nbproject/project.xml View File

@ -0,0 +1,37 @@
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://www.netbeans.org/ns/project/1">
<type>com.microchip.mplab.nbide.embedded.makeproject</type>
<configuration>
<data xmlns="http://www.netbeans.org/ns/make-project/1">
<name>tests9_timer_6000hz</name>
<name>tests8_timer_6000hz</name>
<name>tests7_timer_6000hz</name>
<name>tests6_timer_6000hz</name>
<name>tests5_timer_6000hz</name>
<name>tests4_timer_6000hz</name>
<name>tests3</name>
<name>tests2</name>
<name>tests1</name>
<name>test2</name>
<name>test1</name>
<creation-uuid>1f6b2f6c-8c6d-40dd-a737-d73d987b2bef</creation-uuid>
<make-project-type>0</make-project-type>
<c-extensions>c</c-extensions>
<cpp-extensions/>
<header-extensions/>
<asminc-extensions/>
<sourceEncoding>ISO-8859-1</sourceEncoding>
<make-dep-projects/>
<sourceRootList/>
<confList>
<confElem>
<name>default</name>
<type>2</type>
</confElem>
</confList>
<formatting>
<project-formatting-style>false</project-formatting-style>
</formatting>
</data>
</configuration>
</project>

Write Preview
Loading…
Cancel
Save